MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

TestingTheColorComputer: Difference between revisions

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Jump to navigation Jump to search
mNo edit summary
 
Line 13: Line 13:
== Quick power, keyboard and CPU test ==
== Quick power, keyboard and CPU test ==


The CoCo controls a tape player connoected to it through the CASSETTE port, via an internal relay that makes a distinctive "click" sound. There is no need for any cable or tape player for this test.
No special tools, cable or tape player are needed for this quick test.
 
The CoCo controls a tape player connected to it through the CASSETTE port via an internal relay that makes a distinctive "click" sound.  


To test your Color Computer power, keyboard and CPU without any extra tools :
To test your Color Computer power, keyboard and CPU without any extra tools :

Latest revision as of 11:45, 21 July 2022

Testing the Color Computer

There are a few ways to test operation of a Color Computer. This may be useful when buying or selling a CoCo, when taking out old equipment from storage or simply to test your daily driver.

These tips for testing apply to all Color Computer models unless otherwise noted.

Preparing to test

Quick power, keyboard and CPU test

No special tools, cable or tape player are needed for this quick test.

The CoCo controls a tape player connected to it through the CASSETTE port via an internal relay that makes a distinctive "click" sound.

To test your Color Computer power, keyboard and CPU without any extra tools :

  • Connect your computer to a power source, make sure it's the proper voltage
  • Power on the CoCo, a "click" sound should be heard from the relay controlling power to the cassette port. The same click can be heard when the CoCo is powered on and you press the RESET button.
    • If you heard the relay sound when powering on, compare it to pressing the RESET button several times. The RESET button sound should be different when the CoCo is ON or OFF.
    • After hearing the relay sound and turning on the CoCo, type MOTOR ON (follower by the ENTER key) blindly. You should hear again the relay sound

If you've heard the relay sound after typing MOTOR ON, there is a good chance the power, CPU and keyboard are functional on your CoCo.

Display test

All CoCos come with a standard RF output port (RCA female connector). This can be confusing as many older computers and game consoles with such a port can be connected to a standard composite monitor.

The CoCo can't use such a monitor directly, as it was originally designed to be connected to TVs commonly available at home.

In order to test video operation you need to connect the CoCo to a modern TV, using a coaxial connection. The easiest and cheapest way to do this with common components is to get a cable and adapter as follows :

  1. Connect the adapter to your CoCo and to the cable. Connect the other end of the cable to the TV.
  2. Turn on the TV and change to channel 3 or 4
  3. Turn on the CoCo, play with the switch behind your CoCo. Only one setting may work best on your TV depending on different factors.

Troubleshooting

  • One common cause for a CoCo to be "dead" is the chips becoming loose over time and moving. Make sure the CoCo is off and disconnected, then open its case and reseat any chips.
  • Some capacitors may have blown or leaked over time. These components can be replaced by yourself if you have the soldering experience, some people in the community also offer this service.