MediaWiki:Sitenotice:
2025-12-29: I have restored the wiki to a backup from the end of November. Starting in September 2025, accesses went form the 800MB-1.2GB range per month to 26GB in September, 42GB in October, and 70GB in November with most accesses originating from China. As soon as I realized what was causing all the access problems in November, I shut it down (it had reached 36GB by then) behind a password/login screen. The database had gotten corrupted, and I tried a restore from just before the spike in access but that didn't work. Thus, end of November. I still have the other daily backups so if there were any important additions in December, let me know and maybe they can be recovered. - Allen H.
Talk:MC-10 Micro Color Computer
Printer claim
This statement
- "Radio Shack offered a 16kRAM expansion interface and a thermal printer for the MC-10 but no more"
is sort of true but also mistaken. While Radio Shack did promote the TP-10 printer as being ideal for the MC-10, the reason was not the TP-10 being the only compatible printer but rather the TP-10's very low cost, matching the primary goal of the MC-10 itself: getting down to the lowest price target possible to compete down at the bottom range of the market.
But the TP-10 was not the only Radio Shack printer usable by the MC-10. The CoCo and the MC-10 used the same 4-pin DIN round-plug serial cable (Catalog Number 26-3020) as their printer port. With that cable, any CoCo-compatible printer would work with the MC-10 right out of the box. And there was a huge variety of CoCo-compatible (and therefore also MC-10 compatible) printers offered by Radio Shack, using all kinds of printing methods (plotters, dot matrix, line printers, inkjet, thermal, daisy wheel), costing from just over $100 to thousands, with some capable of color output. And just to show the wide variety of printers the MC-10 supported, Radio Shack even sold a special cable (Cat. No. 26-3009) which allows either a CoCo or an MC-10 to connect to one of the earliest Tandy printers, the already-discontinued Quick Printer II, or to the Model I's Expansion Interface. Carney (talk) 16:04, 6 June 2023 (UTC)