MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

Multi-Pak Interface

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Revision as of 00:18, 8 September 2012 by Luis46coco (talk | contribs)
Jump to navigation Jump to search
Multi-pak 26-3024 Grey
Multi-pak 26-3024 Grey
Multi-pak 26-3024
Multi-pak 26-3024 White
Multi-pak 26-3124
Multi-pak 26-3124 White

The MULTIPAK is a peripheral that plugs into the slot of expansion of the Color Computer (cartridge port) and expands it to handle up to 4 cartridges interchangeable and can be used one at a time without having to put out one another, this exchange of the 4 slot can be done without shutting down the computer, but sometimes need to use the reset, you can even do some things with several at once

Exist the following models:

26-3024 Grey

26-3024 White

26-3124 White

There are also custom made MULTIPAK and 8 Slot MULTIPAK

To use these MULTIPAK smoothly with Color Computer 3, it takes them an improvement There are two ways:

[26-3124 MPI CoCo 3 Upgrade #1]

26-3124 MPI CoCo 3 Upgrade #2

Besides the two that provides Cloud-9 hardware Upgrade PAL Multi-Pak, but you have to send the MULTIPAK.

Multi-Pak Upgrade for the PAL Multi-Pak 26-3024 $ 10 + s/h

Multi-Pak Hardware Upgrade for the Multi-Pak 26-3124 $ 25 + s/h


The disk controller must be used in slot 4, and while you can use two disk controllers in the mpi problems exist

Link

Multi-Pak Interface Owners Manual (Tandy)

Multipak 26-3124 for then color computer 2 Owners Manual