Sitenotice:
2020: NameSpaces are going to be implemented this year to better separate content. OS-9 Al (talk) 11:18, 15 April 2020 (CDT)
2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

26-3029

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Revision as of 16:30, 29 December 2014 by AllenHuffman (talk | contribs) (adding Nav template)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 12/29/2014. Total Pages: 680. Total Files: 943.


Home / Hardware - 26-3029


Controler

This model was introduced for use with the CoCo 2 (as it lacked the original CoCo's +12V power supply), and is also mounted in a long cartridge. Early 26-3029 controllers had a Fujitsu MB8877A (5-volt only equivalent of the WD1793) and are capable of high density 3.5" drive operation. Mike Pepe has a page showing how he upgraded a 26-3029 controller: [1]

Note that most 26-3029 controlles use the WD1773 floppy drive controller chip which IS NOT capable of operating high density floppy drives.

Drive

26-3029 'Color Computer Mini Disk' This drive model had a white case, but was still a full-height, vertically-mounted assembly. These first two styles have 34-pin card-edge connectors on their rear panels rather than captive ribbon cables. The addition of extra drives required using additional case/power supply/drive units.