Sitenotice: 11/29/2018: The wiki is back. It turns out, some anti-virus product on my web server had an issue with the latest version of PHP. My server techs have resolved this issue, and things should be working again. During the investigation, I did restore to a backup from September. There is a chance that any changes done since then were lost, but I do not recall any edits. --OS-9 Al
8/30/2016: Massive re-work is being done on the InfoBox Templates. Read that page to keep up with the plan for that, and adding better keyword tags (categories) to all the pages. --OS-9 Al (talk) 15:28, 31 August 2016 (CDT)
Atari to CoCo Joystick Adapter
|Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al|
This page was last updated on 09/3/2016. Total Pages: 647. Total Files: 937.
|Name||Atari to CoCo Joystick Adapter|
|Info Source||Atari/Commodore joystick adapter|
|About the Hardware Info Box|
Here's a fun and easy project I've loved using with my CoCo. This adapter was designed to interface an Atari(or C64) style joystick to you CoCo. This is great for games like Zaxxon or Ghana Bwana, where analog controllers are sometimes too sensitive. I left the Atari connector out of the schematic so you can also easily convert a dusty PC gamepad or nearly any "digital" (meaning on/off switches as opposed to analog 0-5v) joystick. I attached an Atari joystick cable to an old Nintendo gamepad, plugged into this circuit to plug into my CoCo. Talk about a Frankenstein setup!
Problems: pressing together up and down or left and right (it is unlikely, but can happen) would short circuit, damaging the chip or power supply of coco.
Also the two buttons are not connected in the common direction switch, forcing you to do this montage, just inside the joystick and having to do, obligatorily, modifications to the board of the joystick.
This circuit solves both problems (the short-circuit signals and the lack of a common signal for shooting and direction), and also makes the common signals Atari joystick is GND instead of +5 V. This means that the joysticks which have circuitry-trigger function.
Use exactly the same components and with the same values the original circuit. It's just the disposition that changes.
Autor: Miguel Angel Rodriguez Jodar (mcleod_ideafix). Realiced in: Spain www.retrowiki.es