2020: NameSpaces are going to be implemented this year to better separate content. OS-9 Al (talk) 11:18, 15 April 2020 (CDT)
2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)
|Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al|
This page was last updated on 05/17/2019. Total Pages: 680. Total Files: 956.
AND THEY SAID IT COULDN'T BE DONE!
We confess that we asked a lot of people about hard copy out of VIDEOTEX, all the BBS' and whatever other place good ideas and programs might reside.
Radio Shack Computer Center: "We've really asked. You can't do it. You know that both the printer and the modem come out of the same port, anyway, so I just guess it’s one of those things you can't do."
CompuServe: "We've asked. Frankly, a whole lot of people want to be able to get hard copy from their COLOR Computer. But Tandy says there's just no way."
Radio Shack Customer Service: "No, you Can't do that with a COLOR Computer."
Jorge Mir of New Berlin, WS and Al J. Morgan of Pittsfield, MA both found a way. Since there are advantages to both programs, both are reproduced below as separate articles. And, by the way, next month we'll show you how to get the programs you see listed into memory -- without typing them in.
VIDEOPRINTER BY MORGAN
We understand Al Morgan of Pittsfield, MA, has a LP VII for a left hand and an EPSON 80 F/T for a right. At any rate, he's been most interested in getting the most out of the interaction between a COLOR Computer and a printer.
Elsewhere in this issue of the RAINBOW is a print monitor from AI. This time he takes his hand to a VIDEOTEX screen dump.
Writes AI: "For downloading. Jorge Mir's VIDFIX is excellent. but I think his VIDPRINT seemed a little slow compared to what I came up with. Of course, it does have additional capabilities. Maybe the readers could decide."
OK readers. Here is VIDPRINT by Al Morgan. You decide which is best for YOUR application.
1 REM VIDPRINT 2 REM BY AL MORGAN 10 Y=1536:CLS 20 FOR X=2560 TO 16383 30 POKE X-Y,PEEK(X) 40 IF X-Y<>1535 THEN 90 50 Y=Y+512 60 I$=INKEY$: IF I$="" THEN 60 70 IF I$="P" GOSUB 100 80 CLS 90 NEXT X: END 100 L=0:FOR P=1024 TO 1535 110 A=PEEK(P) 120 IF A>90 THEN A=A-64 130 A$=A$+CHR$(A):L=L+1:IF L<>32 THEN 160 140 PRINT#-2,CHR$(16);"23";A$ 150 L=0:A$="" 160 NEXT P 170 RETURN
To make this work, you:
First, load VIDEOTEX, but do not EXEC.
Second, type in the command mode: FOR X=2102 TO 2110: POKE X,18: NEXT. This allows the reset key to be pushed to get you back to Basic.
Then, EXEC VIDEOTEX.
Log on, do whatever it is you want, and then go offline. Once your session has ended, press the RESET button on the back of the COLOR Computer. This returns you to Basic.
In command mode, type in
You can now use the up and down arrows to "scroll" through the pages in the normal way. When you find a page, you wish to print out, press the "P" key. The page will be copied on the printer.
VIDEOPRINTER BY MIR
Are you one of those people who have been frustrated by not being able to use your printer with the VIDEOTEX program?
Certainly, you can save pages, go offline, and copy everything down. At least that doesn't cost you any CompuServe time charge. But you still have to copy the whole thing by hand -- and sometimes the messages are long.
Jorge Mir contributes the following program which will allow you to print VIDEOTEX.
First, load VIDEOTEX and, before you EXEC it, type in POKE 2103,255 directly from the keyboard. ENTER, that command.
Now, EXEC VIDEOTEX and run it in the normal way. When you are finished with VIDEOTEX and are offline, press the RESET button. This will return you to Basic.
Now, type POKE 25,6 and ENTER it. This will cause Basic to be loaded at HEX location 0601 (and will give you 1.5K more memory if you are using Extended Color Basic). This also reserves a place to load Basic where none of the pages from VIDEOTEX are stored.
Load the Basic program listed below (VIDPRINT). Type RUN and the first page stored from the VIDEOTEX program will appear on the screen. Now you can:
- Type P -- The program will ask for a page number. Type in any number between 6 and 31.A page of that number will appear on the screen.
- Type X -- The page you are viewing will be printed on the printer.
- Type <SPACE> -- The next page will be displayed.
- Type B -- The program goes back to the previous page for display.
If there is "garbage" on the screen, that is the end of saved pages. Just go (B)ack to the previous page.
In order to go back to VIDEOTEX, you will have to reload the program.
1 REM VIDPRINT 2 REM BY JORGE MIR 3 REM 10 PAGE=6:GOTO80 20 A$=INKEY$:IF A$="" THEN 20 30 IF A$=" " THEN PAGE=PAGE+l 40 IF A$="B" THEN PAGE=PAGE-l 50 IF A$="X" THEN 250 60 IF A$="P" THEN INPUT "PAGE";PAGE 70 IF PAGE>31 THEN PAGE=0:GOTO 20 80 FOR F=0 TO 1 90 FOR E=0 TO 1 100 FOR D=0 TO 1 110 FOR C=0 TO 1 120 FOR B=0 TO 1 130 FOR A=0 TO 1 140 IF PAGE=A*32+B*16+C*8+D*4+E*2+F THEN 160 150 NEXT A,B,C,D,E,F 160 FOR X=65478 TO 65488 STEP 2 170 POKE X,200:NEXT X 180 IF F=1 THEN POKE 65479,100 190 IF E=1 THEN POKE 65481,100 200 IF D=1 THEN POKE 65483,100 210 IF C=l THEN POKE 65485,100 220 IF B=1 THEN POKE 65487,100 230 IF A=1 THEN POKE 65489,100 240 GOTO 20 250 L=0:A$="":P=PAGE*512 260 FOR X=P TO P+511 270 A=PEEK(X) 280 IF A>90 THENA$=A$+CHR$(A): L=L+1:IF L<>32 THEN 320 300 PRINT#-2,A$ 310 L=0:A$="" 320 NEXT X:GOTO20
If you have 32K, you can increase the number of pages you can store. Just POKE 2112,58. As Jorge says, "That's all there is to it!"
If you have both 32K and Extended Color Basic, you will be able to store 53 pages total; reenter VIDEOTEX "at any time; and make extra copies of the new VIDEOTEX program.
This is done by running the program called VIDFIX below. First, load VIDEOTEX. Then load VIDFIX. Put a blank tape in the tape recorder and press both "play" and "record" buttons.
Type RUN. When the tape is done you will have five copies of the new program. If you want more or fewer copies, simply make the necessary change in line 70.
VIDFIX moves the VIDEOTEX program into high RAM. You can run VIDEOTEX, use the RESET to return to Basic, and then reenter VIDEOTEX by typing EXEC 30208. That is the new VIDEOTEX address.
1 REM VIDFIX 2 REM BY JORGE MIR 10 A=30208 20 POKE 2103,255 30 POKE 2112,53 40 FOR X=1728 TO 3839 50 POKE A,PEEK(X) 55 PRINT CHR$(PEEK(X)); 60 A=A+l:NEXT X 70 FOR X=1 TO 5 80 CSAVEM"VIDEOTEX",30200,32319, 30208 90 MOTOR ON:FOR Z=1 TO:NEXT Z 100 MOTOR OFF:NEXT X:END