MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

Hi-Res Joystick Hardware

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Revision as of 13:48, 14 April 2017 by Luis46coco (talk | contribs)
Jump to navigation Jump to search
WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 04/14/2017. Total Pages: 728. Total Files: 992.


Home


Pages: 1 Year: Unknown TOSEC: Dual Hi-Res Joystick Adapter (19xx)(Hawksoft) Size: 121,976 Publisher: Hawksoft


Manual

TANDY®

High-Resolution Joystick Interface Owner's Manual

    • Special Software is Required

The High-Resolution Joystick Interface is specially designed for use with the Tandy Color Computer 2 or Tandy Color Computer 3. Used with the Deluxe Joystick or Color Mouse, the Interface provides a highly accurate method of cursor control that can access up to 640 x 192 pixel resolution. It utilizes the cassette output of the Color Computer to convert analog voltage levels of the joystick into pulses of varying duty cycles.

This conversion requires special software which will provide the necessary pulses into the Interface. Ask for information on available software which supports the High-Resolution Joystick Interface at your Radio Shack Computer Center or store.

PRECAUTIONS

The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.

  • Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.
  • Do not carry the interface by the cable.
  • Do not use the Interface in extreme temperatures (either high or low) or in direct sunlight.
  • Do not spill liquid on the Interface.
  • Do not disassemble the Interface.
  • Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.

SPECIFICATIONS

Resolution: 640 x 192

Operating Temp. Range: 55 to 85ºF (12.8 to 29.4ºC)

Storage Temp. Range: -40 to 180ºF (-40 to 71ºC)

Humidity: 40% to 80% RH (non-condensing)

INSTALLATION

Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.

1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.

2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.

3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.

OPERATION

Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.

To begin using the Color Computer with the Interface, load the appropriate program and RUN it.


WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 04/14/2017. Total Pages: 728. Total Files: 992.


Home / Hardware - Hi-Res Joystick Hardware