MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

Atari to CoCo Joystick Adapter

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Jump to navigation Jump to search
WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 01/5/2013. Total Pages: 744. Total Files: 994.


Home / Hardware - Atari to CoCo Joystick Adapter


Atari/Commodore joystick adapter

Here's a fun and easy project I've loved using with my CoCo. This adapter was designed to interface an Atari(or C64) style joystick to you CoCo. This is great for games like Zaxxon or Ghana Bwana, where analog controllers are sometimes too sensitive. I left the Atari connector out of the schematic so you can also easily convert a dusty PC gamepad or nearly any "digital" (meaning on/off switches as opposed to analog 0-5v) joystick. I attached an Atari joystick cable to an old Nintendo gamepad, plugged into this circuit to plug into my CoCo. Talk about a Frankenstein setup!

Problems: pressing together up and down or left and right (it is unlikely but can happen) would cortocircito, damaging the circuit or power can of coconut.

Also the two buttons are not connected in the common direction switch, forcing you to do this montage, just inside the joystick and having to do, obligatorily, modifications to the plate of the joystick.

This circuit solves both problems the other (the short-circuit signals and the lack of a common signal for shooting and direction), and also makes the common signals Atari joystick is GND instead of +5 V. This means that the joysticks which have circuitry-trigger function.

Use exactly the same components, the original circuit. It is the provision which changes.