Hi-Res Joystick Hardware - Revision history

Luis46coco: Blanked the page

2017-04-14T20:45:10Z

Blanked the page

← Older revision		Revision as of 16:45, 14 April 2017
Line 1:		Line 1:
	~~{{Header}}~~
	~~----~~
	~~[[Main_Page\|Home]]~~



	*'''[[Tandy Hi-Res Joystick Adapter]]'''
	*'''[[CocoMax]]'''
	*'''[[Dual Hi-Res Joystick Adapter]]'''

	~~Pages: 1~~
	~~Year: Unknown~~
	~~TOSEC: Dual Hi-Res Joystick Adapter (19xx)(Hawksoft)~~
	~~Size: 121,976~~
	~~Publisher: Hawksoft~~

	~~[[File:Hwmanual-Dual-Hi-Res-Joystick-Adapter-(19xx)(Hawksoft).jpg\|thumb]]~~
	~~----~~

	~~'''Manual'''~~

	~~'''TANDY®'''~~

	~~'''High-Resolution Joystick Interface Owner's Manual'''~~

	** Special Software is Required

	~~The High-Resolution Joystick Interface is specially designed for use with the Tandy Color Computer 2 or Tandy Color Computer 3.~~
	Used with the Deluxe Joystick or Color Mouse, the Interface provides a highly accurate method of cursor control that can access up to 640 x 192 pixel resolution. It utilizes the cassette output of the Color Computer to convert analog voltage levels of the joystick into pulses of varying duty cycles.

	This conversion requires special software which will provide the necessary pulses into the Interface. Ask for information on available software which supports the High-Resolution Joystick Interface at your Radio Shack Computer Center or store.

	~~'''PRECAUTIONS'''~~

	~~The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.~~
	*Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.
	*Do not carry the interface by the cable.
	*Do not use the Interface in extreme temperatures (either high or low) or in direct sunlight.
	*Do not spill liquid on the Interface.
	*Do not disassemble the Interface.
	*Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.

	~~'''SPECIFICATIONS'''~~

	~~Resolution: 640 x 192~~

	~~Operating Temp. Range: 55 to 85ºF (12.8 to 29.4ºC)~~

	~~Storage Temp. Range: -40 to 180ºF (-40 to 71ºC)~~

	~~Humidity: 40% to 80% RH (non-condensing)~~

	~~[[File:Tandy HiRes Joysticks Manual.gif]]~~
	~~'''INSTALLATION'''~~

	~~Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.~~

	~~1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.~~

	~~2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.~~

	~~3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.~~

	~~'''OPERATION'''~~

	~~Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.~~

	~~To begin using the Color Computer with the Interface, load the appropriate program and RUN it.~~

	~~{{NavHardware}}~~

Luis46coco at 13:48, 14 April 2017

2017-04-14T13:48:20Z

← Older revision		Revision as of 09:48, 14 April 2017
Line 5:		Line 5:


	*'''[[Tandy Hi-Res Joystick Adapter]]''' ~~[[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]~~		*'''[[Tandy Hi-Res Joystick Adapter]]'''
	*[['''CocoMax''']]		*'''[[CocoMax]]'''
	*[['''Dual Hi-Res Joystick Adapter''']]		*'''[[Dual Hi-Res Joystick Adapter]]'''

	Pages: 1		Pages: 1

Luis46coco at 13:47, 14 April 2017

2017-04-14T13:47:12Z

← Older revision		Revision as of 09:47, 14 April 2017
Line 5:		Line 5:


	*[['''Tandy Hi-Res Joystick Adapter''']] [[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]		*'''[[Tandy Hi-Res Joystick Adapter]]''' [[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]
	*[['''CocoMax''']]		*[['''CocoMax''']]
	*[['''Dual Hi-Res Joystick Adapter''']]		*[['''Dual Hi-Res Joystick Adapter''']]

Luis46coco at 13:46, 14 April 2017

2017-04-14T13:46:28Z

← Older revision		Revision as of 09:46, 14 April 2017
Line 5:		Line 5:


			*[['''Tandy Hi-Res Joystick Adapter''']] [[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]
			*[['''CocoMax''']]
			*[['''Dual Hi-Res Joystick Adapter''']]


	*'''TANDY® High-Resolution Joystick Interface''' [[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]
	*'''CocoMax'''




	~~Dual Hi-Res Joystick Adapter~~
	Pages: 1		Pages: 1
	Year: Unknown		Year: Unknown

Luis46coco at 03:33, 14 April 2017

2017-04-14T03:33:57Z

@@ Line 1: / Line 1: @@
-{{NavHardware}}
+{{Header}}
@@ Line 7: / Line 11: @@
 ----
@@ Line 58: / Line 72: @@
 To begin using the Color Computer with the Interface, load the appropriate program and RUN it.

Luis46coco at 03:17, 14 April 2017

2017-04-14T03:17:00Z

← Older revision		Revision as of 23:17, 13 April 2017
Line 3:		Line 3:


	*'''TANDY® High-Resolution Joystick Interface''' [[File:Tandy ~~Hight~~-Resolution interface.jpg]]		*'''TANDY® High-Resolution Joystick Interface''' [[File:Tandy High-Resolution interface.jpg\|thumb\|Tandy High-Resolution interface\|alt=HiRes Joystick]]
	*'''CocoMax'''		*'''CocoMax'''

Luis46coco at 03:13, 14 April 2017

2017-04-14T03:13:29Z

← Older revision		Revision as of 23:13, 13 April 2017
Line 1:		Line 1:
			{{NavHardware}}



			*'''TANDY® High-Resolution Joystick Interface''' [[File:Tandy Hight-Resolution interface.jpg]]
			*'''CocoMax'''



Line 37:		Line 44:
	Humidity: 40% to 80% RH (non-condensing)		Humidity: 40% to 80% RH (non-condensing)

			[[File:Tandy HiRes Joysticks Manual.gif]]
	'''INSTALLATION'''		'''INSTALLATION'''

Luis46coco at 02:51, 14 April 2017

2017-04-14T02:51:40Z

← Older revision		Revision as of 22:51, 13 April 2017
Line 20:		Line 20:

	The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.		The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.
	• Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.		*Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.
	• Do not carry the interface by the cable.		*Do not carry the interface by the cable.
	• Do not use the Interface in extreme temperatures (either high or low) or in direct sunlight.		*Do not use the Interface in extreme temperatures (either high or low) or in direct sunlight.
	• Do not spill liquid on the Interface.		*Do not spill liquid on the Interface.
	• Do not disassemble the Interface.		*Do not disassemble the Interface.
	• Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.		*Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.

	'''SPECIFICATIONS'''		'''SPECIFICATIONS'''
Line 41:		Line 41:

	Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.		Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.

	1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.		1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.

	2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.		2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.

	3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.		3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.

Line 48:		Line 51:

	Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.		Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.

	To begin using the Color Computer with the Interface, load the appropriate program and RUN it.		To begin using the Color Computer with the Interface, load the appropriate program and RUN it.

Luis46coco at 02:49, 14 April 2017

2017-04-14T02:49:42Z

← Older revision		Revision as of 22:49, 13 April 2017
Line 5:		Line 5:

	'''Manual'''		'''Manual'''

	'''TANDY®'''		'''TANDY®'''

	'''High-Resolution Joystick Interface Owner's Manual'''		'''High-Resolution Joystick Interface Owner's Manual'''

	** Special Software is Required		** Special Software is Required

	The High-Resolution Joystick Interface is specially designed for use with the Tandy Color Computer 2 or Tandy Color Computer 3.		The High-Resolution Joystick Interface is specially designed for use with the Tandy Color Computer 2 or Tandy Color Computer 3.
	Used with the Deluxe Joystick or Color Mouse, the Interface provides a highly accurate method of cursor control that can access up to 640 x 192 pixel resolution. It utilizes the cassette output of the Color Computer to convert analog voltage levels of the joystick into pulses of varying duty cycles.		Used with the Deluxe Joystick or Color Mouse, the Interface provides a highly accurate method of cursor control that can access up to 640 x 192 pixel resolution. It utilizes the cassette output of the Color Computer to convert analog voltage levels of the joystick into pulses of varying duty cycles.

	This conversion requires special software which will provide the necessary pulses into the Interface. Ask for information on available software which supports the High-Resolution Joystick Interface at your Radio Shack Computer Center or store.		This conversion requires special software which will provide the necessary pulses into the Interface. Ask for information on available software which supports the High-Resolution Joystick Interface at your Radio Shack Computer Center or store.

	'''PRECAUTIONS'''		'''PRECAUTIONS'''

	The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.		The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.
	• Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.		• Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.
Line 19:		Line 26:
	• Do not disassemble the Interface.		• Do not disassemble the Interface.
	• Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.		• Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.
	SPECIFICATIONS
			'''SPECIFICATIONS'''

	Resolution: 640 x 192		Resolution: 640 x 192
	Operating Temp. Range: 55 to 85ºF
	(12.8 to 29.4ºC)		Operating Temp. Range: 55 to 85ºF (12.8 to 29.4ºC)
	Storage Temp. Range: -40 to 180ºF
	(-40 to 71ºC)		Storage Temp. Range: -40 to 180ºF (-40 to 71ºC)
	Humidity: 40% to 80% RH
	(non-condensing)		Humidity: 40% to 80% RH (non-condensing)


	'''INSTALLATION'''		'''INSTALLATION'''

	Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.		Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.
	1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.		1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.
	2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.		2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.
	3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.		3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.

	'''OPERATION'''		'''OPERATION'''

	Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.		Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.
	To begin using the Color Computer with the Interface, load the appropriate program and RUN it.		To begin using the Color Computer with the Interface, load the appropriate program and RUN it.

Luis46coco: Created page with " ---- '''Manual''' '''TANDY®''' '''High-Resolution Joystick Interface Owner's Manual''' ** Special Software is Required The High-Resolution Joystick Interface is speciall..."

2017-04-14T02:47:46Z

Created page with " ---- '''Manual''' '''TANDY®''' '''High-Resolution Joystick Interface Owner's Manual''' ** Special Software is Required The High-Resolution Joystick Interface is speciall..."

New page

----

'''Manual'''
'''TANDY®'''
'''High-Resolution Joystick Interface Owner's Manual'''
** Special Software is Required
The High-Resolution Joystick Interface is specially designed for use with the Tandy Color Computer 2 or Tandy Color Computer 3.
Used with the Deluxe Joystick or Color Mouse, the Interface provides a highly accurate method of cursor control that can access up to 640 x 192 pixel resolution. It utilizes the cassette output of the Color Computer to convert analog voltage levels of the joystick into pulses of varying duty cycles.
This conversion requires special software which will provide the necessary pulses into the Interface. Ask for information on available software which supports the High-Resolution Joystick Interface at your Radio Shack Computer Center or store.
'''PRECAUTIONS'''
The Interface is a very precise electrical device. Handle it with care. Do not drop, hit, or subject it to shock.
• Do not attempt to pull out the connectors by the cables. It may cause damage to the cable and the connectors.
• Do not carry the interface by the cable.
• Do not use the Interface in extreme temperatures (either high or low) or in direct sunlight.
• Do not spill liquid on the Interface.
• Do not disassemble the Interface.
• Should your Interface fail to operate properly, take it to your local Radio Shack Computer Center or store.
SPECIFICATIONS
Resolution: 640 x 192
Operating Temp. Range: 55 to 85ºF
(12.8 to 29.4ºC)
Storage Temp. Range: -40 to 180ºF
(-40 to 71ºC)
Humidity: 40% to 80% RH
(non-condensing)

'''INSTALLATION'''
Before connecting the Interface, be sure that power to the Color Computer and peripherals is turned off.
1. Connect the 6pm DIN connector 1 of the Interface to one of the 2 JOYSTICK lacks of the Color Computer.
2. Connect the 5 pin DIN connector 2 of the interface to the CASS jack of the Color Computer.
3. Connect the 8-pin DIN connector of the Deluxe Joystick to the jack 3 on the Interface.
'''OPERATION'''
Your joystick or color mouse will operate just as if were connected directly to the Color Computer. Note, however, that the resolution on the display will be 10 times higher than normal.
To begin using the Color Computer with the Interface, load the appropriate program and RUN it.