MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues.
2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)
Uploads by Computerdoc
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 23:14, 8 September 2014 | Ultimate 1MB Eprom, 512KB Flash Pak - top.png (file) |  |
91 KB | Rendering of the top of the Ultimate 1MB Eprom / 512KB Flash Pak PCB | 1 |
| 09:01, 13 July 2013 | Grant's 6-Chip 6809 Single Board Computer with Modifications.png (file) |  |
161 KB | As you can see I have added a few minor modifications to Grant's original design. There are status LEDs for RESET, and HALT. I've also added LEDs to BA and BS to show the status of the microprocessor itself. I've also added push buttons for RESET ... | 1 |
| 01:42, 28 October 2016 | 68K SBC V1.jpg (file) |  |
357 KB | This is my very 1st 68000 based single board computer I have ever built. It has an MC68000P12F microprocessor, 2MB of Static Ram, 64KB or 128KB selectable of EPROM storage, 2 serial ports, 2 - 16 bit parallel ports, an 8 bit parallel port off the 6868... | 1 |
| 03:30, 9 April 2013 | Entire coco 3 setup for testing.jpg (file) |  |
486 KB | The is my Coco 3 setup with my Disto Super Controller running with the HDB-DOS v1.4 DW4 Coco 3 rom image burned into a 2764 eprom in slot 1. To the right is shown three 3.5" floppy drives and an ATX power supply powering two of the floppy drives. The... | 1 |
| 20:31, 21 April 2014 | 6809 Multicomp with a VGA Display and 2K of ram.jpeg (file) |  |
511 KB | This is the first VGA display of my 6809 Multicomp Microcomputer running with 2KB of ram with a PS/2 Keyboard. | 1 |
| 07:56, 10 April 2013 | NitrOS-9 with a newly shelled screen.jpg (file) |  |
512 KB | NitrOS-9 with a newly shelled screen using the command "shell i=/w7&" | 1 |
| 07:42, 10 April 2013 | NitrOS-9 Booting Modules.jpg (file) |  |
529 KB | A picture of the Coco 3 Composite Video output on a Bravia HD 1080P Flat screen tv showing NitrOS-9 6809 L2 v3.2.9 Coco 3 80 Trk boot image on a real floppy in the process of booting. | 1 |
| 07:32, 1 March 2014 | Kip's 512KB Memory Upgrade view 2.jpg (file) |  |
539 KB | Here is a second picture from the opposite side. | 1 |
| 05:26, 24 October 2013 | Internal HDB-DOS Eprom Upgrade PCB installed into a Korean Coco 2B.jpg (file) |  |
542 KB | The Internal HDB-DOS Eprom Upgrade PCB is shown installed in a Korean Coco 2B in its first successful test configuration. Notice the red wire in the 14 pin socket. Its purpose is to pass the chip select signal on to the 27128 eprom. The blue wire co... | 1 |
| 02:05, 28 October 2016 | 68K IDE SBC V2.jpg (file) |  |
547 KB | This is the 2nd version of the 68K SBC. This time an IDE Interface has been added. Also the boot rom storage has been increased tremendously. 2 - 512KB FLASH Memory chips are now supported so that adds one more storage option making a total of 1MBs... | 1 |
| 21:59, 26 July 2013 | MultiPak with 3 Floppy Drive Controllers and SuperIDE Controller.jpg (file) |  |
551 KB | My Multipak is is now full with 3 Floppy Drive Controllers and a SuperIDE Interface. | 1 |
| 13:31, 24 September 2015 | 6809, 6309 Blinkenlights Operational.jpeg (file) |  |
553 KB | The 6809 / 6309 Blinkenlights project plugged in and operational. | 1 |
| 08:35, 1 March 2014 | Kip's Coco Sot Extender with Eprom view 2.jpg (file) |  |
554 KB | Here is another picture taken from the opposite side. | 1 |
| 08:32, 1 March 2014 | Kip's Coco Sot Extender with Eprom view 1.jpg (file) |  |
557 KB | Here is a picture of the Coco Slot Extender with an Eprom on the PCB. This allows a DOS ROM to be installed and the user will have access to all their files. | 1 |
| 21:04, 21 April 2014 | My 6809 Multicomp hooked up to a VGA Monitor, PS,2 Keyboard, powered up and running.jpeg (file) |  |
560 KB | My 6809 multicomp hooked up to a VGA Monitor, PS/2 Keyboard, powered up and running. | 1 |
| 07:30, 1 March 2014 | Kip's 512KB Memory Upgrade view 1.jpg (file) |  |
565 KB | This is the first of three pictures I took of my 512KB Memory Upgrade. | 1 |
| 22:17, 26 July 2013 | 80Trk Floppy Drives.jpg (file) |  |
568 KB | My 80 Track Floppy Drives sitting underneath the 40 Track floppy drives. 80 Track drives are white and light gray and the 40 Track Floppy drives are black. | 1 |
| 07:14, 1 March 2014 | Closer view of Kip's 512KB Memory Upgrade in a Coco 3.jpg (file) |  |
572 KB | Here is a picture of a closer view of my 512KB Memory Upgrade PCB mounted in a Coco 3 ready for testing. | 1 |
| 07:39, 1 March 2014 | Kip's 512KB Memory Upgrade view 3.jpg (file) |  |
573 KB | Here is a view of the 512KB Memory Upgrade PCB from directly above. | 1 |
| 13:25, 24 September 2015 | 6809 Blinkenlights Breadboarded Circuit.jpeg (file) |  |
578 KB | The completed 6809 / 6309 Blinkenlights / CPU Tester circuit on a solderless breadboard. | 1 |
| 03:54, 19 June 2014 | Coco Hardware Development Adapter - Top View.jpg (file) |  |
589 KB | This is the top view of my brand new Coco Hardware Development Adapter. | 1 |
| 04:05, 19 June 2014 | Coco Hardware Development Adapter - Bottom View.jpg (file) |  |
591 KB | This is the bottom view of the Coco Hardware Development Adapter | 1 |
| 21:16, 21 April 2014 | A Sample Color VGA display using my 6809 Multicomp Microcomputer.jpeg (file) |  |
600 KB | This is a sample color VGA display with a sample basic program exorcising some of the capabilities of the VGA display logic of the Multicomp as Grant Searle has designed it. | 1 |
| 04:05, 29 October 2016 | 68K IDE SBC V2 on.jpg (file) |  |
604 KB | This is my 2nd 68K SBC powered up and running. I like all the LEDs. I wish there were more. | 1 |
| 22:24, 26 July 2013 | My Coco Setup with 7 Floppy Drives Online.jpg (file) |  |
630 KB | This is my Coco setup with 7 Floppy drives online. As you can see, the desk is not quite long enough to have both Cocos running with MultiPaks. | 1 |
| 06:38, 16 April 2014 | Interface PCB with almost all of the needed parts.jpeg (file) |  |
636 KB | This is the Interface PCB with almost all of the needed parts for the full version of the 6809 version of Grant Searle's Multicomp Microcomputer. | 1 |
| 22:17, 8 September 2014 | FPGA PCB mounted underneath 2nd Version of the Multicomp Interface PCB.jpg (file) |  |
643 KB | This Completed unit is now capable of running a 6809, 6502, or Z80 CPU with 512KB of External Ram, a VGA Monitor, a PS/2 Keyboard and 2 Serial ports. | 1 |
| 07:15, 10 April 2013 | HDB-DOS v1.4 DW4 Coco 3 Boot Screen.jpg (file) |  |
653 KB | Initial Coco 3 boot screen with the HDB-DOS v1.4 DW4 Coco3 rom image burned into a 2764 installed in the first eprom slot of the Disto Super Controller. | 1 |
| 09:02, 27 April 2013 | Pic 0427 152.jpg (file) |  |
655 KB | This is My Combined Coco 3 & Coco 1 Computing Data Center! I have a Hard Disk Specialist Floppy Drive Controller connected to three 3.5" floppy drives in Slot 4 on the MultiPak Interface. A SuperIDE Hard Disk Controller is in Slot 3 with a 256MB Comp... | 1 |
| 20:44, 8 April 2014 | Altera EP2C5T144C8N FPGA Mini-Development PCB tempararily mounted upside down on an interface PCB created just for this purpose.jpeg (file) |  |
665 KB | This is a picture of the Altera EP2C5T144C8N FPGA Mini-Development PCB temporarily mounted upside down on an interface PCB created just for this purpose. | 1 |
| 07:48, 7 March 2014 | ECB 6x0x SBC VME PCB Stage 2 - Back.jpg (file) |  |
698 KB | This is the back of the PCB with almost all the parts soldered in place. | 1 |
| 07:04, 1 March 2014 | Kip's 512KB Memory Upgrade mounted in a Coco 3.jpg (file) |  |
709 KB | This is a picture of my 512KB Memory Upgrade PCB mounted inside a Coco 3 ready for testing. | 1 |
| 07:46, 10 April 2013 | NitrOS-9 Booted Default Screen.jpg (file) |  |
731 KB | The initial screen for NitrOS-9 6809 L2 v3.2.9 Coco 3 80 Trk boot disk after NitrOS-9 is fully booted. | 1 |
| 19:04, 9 September 2014 | Completed Multicomp Microcomputer - top.jpg (file) |  |
787 KB | This is the completed Interface PCB with the FPGA Mini-Development PCB mounted underneath, powered on and connected to my laptop. | 2 |
| 07:29, 7 March 2014 | ECB 6x0x SBC VME PCB Test Build Stage 1 - back.jpg (file) |  |
799 KB | This is the back of the PCB thus far. | 1 |
| 08:09, 7 March 2014 | ECB 6x0x SBC VME PCB Stage 3 - Front.jpg (file) |  |
875 KB | All parts have been placed now except for the supercap in the lower left hand corner of the PCB and three groups of pin headers in the upper left hand corner of the PCB. | 1 |
| 07:08, 1 April 2014 | ECB 6x0x SBC VME PCB Stage 4 - Front.jpg (file) |  |
882 KB | All ICs in installed now save the 29F040 4MBit 512KB Flash Memory chip. | 1 |
| 07:40, 7 March 2014 | ECB 6x0x SBC VME PCB Stage 2 - Front.jpg (file) |  |
898 KB | This second stage of the soldering process has almost all the need parts soldered into place. | 1 |
| 10:29, 27 April 2013 | Modified AUTOEXEC.BAS File Running Off Virtual Drive 0.jpg (file) |  |
932 KB | My modified AUTOEXEC.BAS file running off HDB-DOS Virtual Drive 0. | 2 |
| 03:25, 9 April 2013 | My Version of SiMon6809 Top View.jpg (file) |  |
933 KB | My second attempt to build a 6809 computer is based on Erturk Kocalar's SiMon6809 computer. This pic shows all the chip to chip wiring completed. A few discrete components still need to be added, so it is not operational yet. | 1 |
| 07:25, 7 March 2014 | ECB 6x0x SBC VME PCB Test Build Stage 1.jpg (file) |  |
948 KB | The PCB has all the sockets soldered as well as most of the resistors and capacitors. | 1 |
| 03:21, 9 April 2013 | My Version of Grant Searle's 6-Chip 6809 Computer with some extras Top View.jpg (file) |  |
952 KB | This is my first attempt at creating my very own 6809 based computer which I based on Grant Searle's 6-Chip 6809 Computer. Obviously I added a few more things to it. | 1 |
| 21:48, 26 July 2013 | Coco 3 Autoexec Boot Screen for SuperIDE and 3 Floppy Controllers.jpg (file) |  |
1.07 MB | In an effort to get all my Coco floppies converted to Coco Emulator and Drivewire 4 compatible disk images, I have updated the default Autoexec.bas boot program that comes with the SuperIDE IDE & CF Controller. | 1 |
