MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

MMU RAMROM Mode: Difference between revisions

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 60: Line 60:




The ROM pages ($3C-$3F) can be written to any of the eight avaiable MMU slots. In all cases the last two bits of the page are ignored by the MMU and substituted by the last two bits of the slot number.
The ROM pages ($3C-$3F) can be written to any of the eight available MMU slots. In all cases the last two bits of the page are ignored by the MMU and substituted by the last two bits of the slot number.


For example, writing $3D to slot 2 of the MMU does not map the second 8k page of ROM to addresses $4000-$5FFF. It maps page $3E (the third ROM page), because:
For example, writing $3D to slot 2 of the MMU does not map the second 8k page of ROM to addresses $4000-$5FFF. It maps page $3E (the third ROM page), because:


*
[[image:ROMRAM.png]]


This essemtially means that page $3C will only appear in slots 0 and 4; $3D in 1 and 5; $3E in 1 and 6; $3F in 1 and 7.
This essentially means that page $3C will only appear in slots 0 and 4; $3D in 1 and 5; $3E in 1 and 6; $3F in 1 and 7.

Revision as of 02:52, 2 May 2007

Color Computer 3 Memory Management Unit in ROM/RAM

The MMU in the CoCo 3 has access to 64 blocks of RAM each 8 kilobytes in size. In ROM/RAM mode the last four blocks don't access RAM. They access either internal or external ROM. The RAM/ROM mode is entered by writing any value to address $FFDE. RAM mode is selected by writing any value to address $FFDF.

In ROM/RAM mode there are three different ROM configurations available. They are selected by setting bits 1 and 0 of address $FF90 to:

$3C $3D $3E $3F Bit Value
Extended Color BASIC Color BASIC 16K Cartridge ROM 0X
Extended Color BASIC Color BASIC Reset Initialization Super Extended Color BASIC 10
32K Cartridge ROM 11


MMU Slot description
CPU Address Range Slot Address
$0000 - $1FFF Slot 0: $FFA0, $FFA8
$2000 - $3FFF Slot 1: $FFA1, $FFA9
$4000 - $5FFF Slot 2: $FFA2, $FFAA
$6000 - $7FFF Slot 3: $FFA3, $FFAB
$8000 - $9FFF Slot 4: $FFA4, $FFAC
$A000 - $BFFF Slot 5: $FFA5, $FFAD
$C000 - $DFFF Slot 6: $FFA6, $FFAE
$E000 - $FFFF Slot 7: $FFA6, $FFAF


The ROM pages ($3C-$3F) can be written to any of the eight available MMU slots. In all cases the last two bits of the page are ignored by the MMU and substituted by the last two bits of the slot number.

For example, writing $3D to slot 2 of the MMU does not map the second 8k page of ROM to addresses $4000-$5FFF. It maps page $3E (the third ROM page), because:

This essentially means that page $3C will only appear in slots 0 and 4; $3D in 1 and 5; $3E in 1 and 6; $3F in 1 and 7.