MediaWiki:Sitenotice:
2024-03-02: The wiki ran out of disk space, so things were not working. This has been resolved by adding another 5GB of quota ;-) Thanks to Tim Lindner for reporting the issues. 2020-05-17: If a page gives you an error about some revision not being found, just EDIT the page and the old page should appear in the editor. If it does, just SAVE that and the page should be restored. OS-9 Al (talk) 12:22, 17 May 2020 (CDT)

Datasheets: Difference between revisions

From CoCopedia - The Tandy/Radio Shack Color Computer Wiki
Jump to navigation Jump to search
No edit summary
Line 17: Line 17:
|-
|-
|[[GIME]]||Tandy||Graphics Interrupt Memory Enhancement chip.  This custom chip provides most of the "personality" of the Coco 3, including the hi-res graphics modes, ability to access more than 64k and the ability to connect to an RGB monitor.|| ||
|[[GIME]]||Tandy||Graphics Interrupt Memory Enhancement chip.  This custom chip provides most of the "personality" of the Coco 3, including the hi-res graphics modes, ability to access more than 64k and the ability to connect to an RGB monitor.|| ||
|-
|[[WD1793]]||Western Digital||Floppy disk controller chip. The main component in the floppy disk controller pak, this chip provides functions to control floppy disk drives.|| ||
|}
|}



Revision as of 07:24, 28 September 2014

WELCOME
Looking for CoCo help? If you are trying to do something with your old Color Computer, read this quick reference. Want to contribute to this wiki? Be sure to read this first. This CoCo wiki project was started on October 29, 2004. --OS-9 Al

See Recent Changes. | About this site. | Join the E-Mail List or Facebook Group. | Contact me with updates/questions.

This page was last updated on 09/28/2014. Total Pages: 728. Total Files: 992.


Home / Datasheets - Datasheets


Core Components

Components in this table are key components used in the Color Computer and for the most part are family members within Motorola's product line to build 6800/6809/68000 microcomputers.

Part # Manufacturer Description DataSheet
MC6809E Motorola The Central Processing Unit (CPU) used in the Coco 1,2 and 3 link
MC6821/MC6822 Motorola Peripheral Interface Adapter. Two are used in the Coco to interface the 6809 to IO functions. link
MC6847 Motorola Video Display Generator used to generate text on the Coco 1 and 2 link
MC6884 Motorola Synchronous Address Multiplexer (SAM) used on the Coco 1 and 2, Also known as SN7LS783. This chip interfaces the system memory with the CPU and VDG. link
MCM68A364 Motorola Basic and Extended BASIC ROM chips. These Read-Only Memories (ROMs) are programmed in the factory with the Basic interpreter developed by Microsoft and Microware. link
GIME Tandy Graphics Interrupt Memory Enhancement chip. This custom chip provides most of the "personality" of the Coco 3, including the hi-res graphics modes, ability to access more than 64k and the ability to connect to an RGB monitor.
WD1793 Western Digital Floppy disk controller chip. The main component in the floppy disk controller pak, this chip provides functions to control floppy disk drives.

Additional Components

The following non-core components were used in the Coco models. They are off-the-shelf parts typically used to provide support and minor logic functions on the board. Many of these components will be familiar to electronics experimenters, and are available from several manufacturers.

Part # Manufacturer Description DataSheet
MC14050B Motorola Latch link
74LS273 Octal Flip-Flop link
MC14529B Data Seperator link
74LS138 Decoder link
MC1372 Motorola Video Mixer link
723C Common, off-the shelf 5v voltage regulator. link
LM339 Quad Comparator link
741C Standard [Op-Amp] chip. link
74LS244 Buffer link
78M12 Common, off-the-shelf 12v regulator. link
74LS02 Quad NOR gate link
MCM4027AC3 Motorola 4k RAM chips. Used in Coco 1 only. link
MCM90072C Motorola 16k RAM chips. link